Toshibatec.ca

23 PPM, Mono
350/1,700 Paper Capacity (Std./Max)
Ledger-Size Paper Support
Duplex Printing
Modular Design

‍

Enquire Now

No items found.

23 PPM, Mono
350/1,700 Paper Capacity (Std./Max)
Ledger-Size Paper Support
Duplex Printing
Modular Design

‍

Productivity

B&W MFP
Small Workgroup
23 PPM
Copy, Print, Scan, Fax
10/100 Base T Network Interface Standard
Opt. 802.11 b/g/n wireless

Operability

Interrupt
Energy Saver
AMS/APS
Auto Job Start
Auto Sort Mode
Electronic Sort
ID Card Copy
Department Codes (100)
2-in-1 / 4-in-1

Serviceability

Standard PCL6/PCL XL Printing
23 PPM
2400 x 600 dpi (w/Smoothing)
Up to 11″ x 17 Size Printing
Watermark Feature
N-Up Printing
Optional Auto Duplexing
Optional 802.11 b/g/n Wireless Network

Copy Process: Indirect Electrostatic Photographic Method
‍Copy Speed: 23 PPMFirst Copy Out 7.1 Sec.
‍Warm-Up Time: 20 Sec.
‍Copy Resolution: 600 dpi
‍Stack Feed Bypass: ST-R to LD (14-120 lb Index)
‍Multiple Copying: Up to 999 Copies
‍Reproduction Ratio: 25% - 400%
‍Weight: 59.4 lbs.
‍Approx. Dimensions: 22.6" x 21.2" x 16"
‍Power Source: 115 Volts/12 Amps

‍e-BRIDGE Next Print Specifications

PDL: PCL 6 Emulation Optional: PostScript 3
‍Print Speed: 23 PPM
‍Print Resolution: 600 x 2,400 dpi (with smoothing)
‍Operating Systems: Windows 7, 8, 8.1, 10, 2008R2, 2012, 2012 R2, (WHQL), CUPS PCL Unix, Linux 5.10.x, 6.5.x‍
Interface: 10/100 Base-T Network or USB 2.0, Optional 802.11 b/g/n Wireless

Scan Specifications

‍Scan Speed: 25 SPM (BW) at 600 dpi, 22 SPM (Color) @ 200 dpi, 13 SPM @ 300 dp
‍Scan Modes: Scan-to-Email, Scan-to-File (SMB or FTP), Scan-to-FTP, Scan-to-TWAIN
‍Scan Resolution: Up to 600 dpi
‍File Formats:J PEG, TIFF-Multi/Single page, PDF-Multi/Single Page

Fax Specifications

‍Compatibility: Super G3
‍Data Compression: MH / MR / MMR / JBIG
‍Fax Modem Speed: Up to 33.6 Kbps

English Brochure

French Brochure

English Scpecs Sheet

French Specs Sheet

Toshiba Driver Plugins

Combine documents, perform batch printing and more with driver plugins

Toshiba’s driver plugins assist in optimising your print jobs. Our host of e-Bridge software driver applications enhance the management of complex, large-scale printing tasks. Learn more about our driver plugins below.

Request A Quote

Toshiba e-Bridge Job Point eX^TM

Large print jobs can be a challenge, even for high-volume printers. With Toshiba's e-BRIDGE Job Point eX, you can easily increase your productivity by printing on up to ten Toshiba devices at the same time. This multiplies your print speed by ten for fast and efficient document output. e-BRIDGE Job Point eX integrates into the easy-to-access Toshiba Universal Printer Driver and increases its functionality. The software automatically detects all Toshiba MFDs within a network and is capable of splitting a print job across various devices. The copies are then printed on these systems at the same time, significantly reducing the time needed to finish a large print job.

Increase your productivity by splitting large print jobs and printing simultaneously on several Toshiba e-STUDIO devices.
Combine the output speed of up to ten Toshiba MFDs to accelerate your efficiency.
Print on any Toshiba e-BRIDGE MFD in the network by sending your print job to multiple destinations with just one click.
Benefit from the advantages of e-BRIDGE JobPoint eX via the easy-to-use Toshiba Universal Printer Driver.

e-BRIDGE Job Point Brochure 2024

Toshiba e-Bridge Job Build eX^TM

Toshiba's e-BRIDGE Job Build expands the capabilities of your Toshiba e-STUDIO Multifunction Device (MFD) by allowing it to combine multiple documents—of various file types, paper types, and document settings—into a single print job. Print multiple copies of each set quickly and easily. Reduce costs by switching between colour and black-and-white printing within the same job as needed. Eliminate time-consuming sorting and hand collating.

Print different document types (Word, PDF, Excel, etc.) together as a set
Switch between simplex and duplex printing within a single job
Select from different paper sources for each section of a print job
Combine A4 and A3 plus other paper sizes within a single job
Mix colour and black-and-white output
Use various paper weights and colours
Save time sorting and collating

e-BRIDGE Job Build Brochure 2024

Toshiba e-Bridge Job Separator eX^TM

Toshiba's e-BRIDGE Job Separator further enhances your Toshiba e-STUDIO Multifunction Device (MFD) by allowing it to simply and easily perform batch printing from any Windows application. It does this by allowing the user to create multiple sets of a job, divided by a separation page. Think of the time you’ll save from sorting large sets of documents into batches.

Automatically inserts separation sheets
Easy to use — no training required
Improves workflow for successive, volume printing
Batch print multiple sets from any Windows application
Saves sorting time
Driver-based solution
Perfect for printing school class sets

e-BRIDGE Job Separator Brochure 2024

Toshiba e-Bridge Replicator eX^TM

Toshiba's e-BRIDGE Replicator eX is a simple one-touch application for streamlining the creation of multi-part forms and documents such as invoices, receipts, and statements. If you need to print multi-part forms or documents on a regular basis, you'll know how painful it can be. Much better than old carbonless copy systems, e-BRIDGE Replicator eX is a simple yet effective software driver enhancement that automates multi-copy printing on plain paper. Simply print the same document to multiple paper sources to create different coloured copies that are easy to recognise and identify.

Easy to install and configure
Simple to use interface – print with just a few clicks
Streamline the creation and distribution of multi-part forms and documents such as invoices, receipts, and statements
Replace your old carbon-copy system with a fully automated plain paper process
Take advantage of the simplicity that e-BRIDGE Replicator eX offers, all from within your Toshiba Universal Print Driver.

e-BRIDGE Job Replicator Brochure 2024